Understanding Carpet Cleaning Services

How To Clean Your Gas Fireplace In 4 Easy Steps

While gas fireplaces are much cleaner than traditional wood burning fireplaces, they will still need to be cleaned a few times a year in order to ensure they remain beautiful and continue to function properly. While the task of cleaning these fireplaces may seem a bit overwhelming at first, the truth is, this cleaning process is typically quite simple. In fact, by following the instructions outlined below, you will be able to complete this task yourself in just four easy steps.

What You Will Need

  • Vacuum with hose attachment
  • White vinegar
  • Warm water
  • Clean spray bottle
  • Clean paintbrush
  • Rubber squeegee
  • Nonabrasive cleaning cloth
  • Clean microfiber cloth

Step 1: Remove And Clean Glass

Begin by removing the glass that covers your gas fireplace. This task can typically be accomplished by simply removing the clips along the edge of the glass and lifting the glass upwards. However, in some cases, the glass will be soldered in place. If this is the case with your fireplace, you should not attempt the cleaning process on your own. Instead, you should call in a professional that specializes in fireplace cleaning.

If you were able to successfully remove your fireplace glass, the next step will be to clean this glass. This can be done using a cleaning solution that consists of one part white vinegar and one part warm water. Place this solution into your clean spray bottle and apply to the entire piece of glass. Next, using a nonabrasive cloth, gently scrub the glass using circular motions. Finally, use your squeegee to remove the cleaning solution and set the glass aside to dry completely.

Step 2: Remove Burner And Logs From Fireplace

Before removing any items from the interior of your fireplace, you will need to ensure that the gas supply has been turned off. This can be done by turning the supply valve all the way to the right.

Once the gas is off, you will need to carefully remove both the logs and burner from inside your fireplace. This should be done with great care as these logs can be incredibly fragile.

Using your clean paintbrush, simply brush away any debris that has settled on your logs and burner.

Step 3: Clean Inside Your Fireplace

Using your vacuum's hose attachment, remove any debris from inside of your fireplace. Be sure to check for cobwebs and small insects in the corners of your fireplace.

Next, use your microfiber cloth to clean the gas valve inside your fireplace. This is an important part of preventing potentially dangerous blockages.

Finally, check your vent for any signs of a blockage. If these vents are blocked by any large debris, such as a bird's nest, you will need to have the vents professionally cleaned before moving forward.

Step 4: Reassemble Your Fireplace

Finally, you will need to reassemble your fireplace in the opposite order that was used to disassemble it. Once all of the pieces are put back in place, you will be able to turn the gas supply back on and relight your pilot light.

Talk to professionals at places like Northwest Chimney Service Inc for more information.


Share